10-31
Troubleshooting > Troubleshooting
1105
Failed to send via SMB.
Check the following settings.
[
System Menu/Counter
] key > [
System/Network
] >
[
Network
] > [
TCP/IP Settings
] > [
Protocol Detail
] >
[
SMB Client (Transmission)
]
page 8-29
Failed to send the e-mail.
Select [
On
] of the SMTP settings on the Command
Center RX.
page 2-52
Failed to send via FTP.
Check the following settings.
[
System Menu/Counter
] key > [
System/Network
] >
[
Network
] > [
TCP/IP Settings
] > [
Protocol Detail
] >
[
FTP Client (Transmission)
]
page 8-29
1106
Failed to send the e-mail.
Check the sender address of SMTP on the Command
Center RX.
page 2-52
1131
Failed to send via FTP.
Enable the SSL.
[
System Menu/Counter
] key > [
System/Network
] >
[
Network
] > [
Secure Protocol
] > [
SSL
]
page 8-33
1132
Failed to send the e-mail.
Check the following of the SMTP server.
•
Is SMTP over SSL available?
•
Is the encryption available?
Refer to the
Command
Center RX
User Guide
.
Failed to send via FTP.
Check the following of the FTP server.
•
Is FTPS available?
•
Is the encryption available?
—
2101
Failed to send via SMB.
Check the network and SMB settings.
•
The network cable is connected.
•
The hub is not operating properly.
•
The server is not operating properly.
•
Host name and IP address
•
Port number
—
Failed to send via FTP.
Check the network and FTP settings.
•
The network cable is connected.
•
The hub is not operating properly.
•
The server is not operating properly.
•
Host name and IP address
•
Port number
—
Failed to send the e-mail.
Check the network and Command Center RX.
•
The network cable is connected.
•
The hub is not operating properly.
•
The server is not operating properly.
•
POP3 server name of the POP3 user
•
SMTP server name
page 2-52
Error
Code
Message
Corrective Actions
Reference
Page
