TASKalfa 306ci Operation Manual Download Page 184

Page: 184 / 455

5-24

Operation on the Machine > Sending Document to Desired Shared Folder on a Computer (Scan to PC)

Check the status.

Check the information.

Change the delay as required.

Check the connection.

[

Menu

] > [

Connection Test

]

"Connected." appears when connection to the destination is correctly established. If "Cannot
connect." appears, review the entry.

To enter multiple destinations, select [

Next Destination

] and enter the next destination.

You can register the entered information in the Address Book by selecting [

Add to Address Book

Select [OK].

Destinations can be changed later.

Select the functions.

Select [

Functions

] to display other functions.

Press the [Start] key.

Sending starts.

Confirmation Screen of Destinations (page 5-39)

Send (page 6-4)

Summary of Contents for 306ci








































































































































































































































































































































































































































































Search results

Summary of Contents for 306ci

Reviews:

Related manuals for 306ci

Brands by name

Popular brands

TASKalfa 306ci, Operation Manual

Search results

Summary of Contents for 306ci

Reviews:

Related manuals for 306ci

Brands by name

Popular brands