Windows CE Setup
LP-E Card Applet
27
Your mobile computer begins synchronization to the
host PC already on the network.
NOTE: By default, ActiveSync will be initiated every time you
plug in your LP-E Card. If you do not want to run ActiveSync
automatically, or if you want to run a different program when
you insert the card, you can use Targus’ LP-E Card Applet.
This applet also allows you to control other unique features
of Targus’ Ethernet software.
If you get a message saying that no IP address has been
set, please contact your network administrator.
LP-E Card Applet
The LP-E Card Applet allows you to view the LP-E card
configuration, manage network status indicators and
specify what program, if any, to auto-launch. To open the
applet, double-tap the LP-E icon in the task tray.
NOTE: The LP-E Card Applet performs the same functions
on any Windows CE-based mobile computer. The example
screens in this section are from a Palm-size PC. The screens
you see will vary depending of the type of mobile computer
you are using.
