Pocket PC Setup
Software Installation
12
Software Installation
This procedure applies only to Pocket PCs.
NOTE: Install the software BEFORE inserting the LP-E Card.
1
Connect your Pocket PC to a host PC using the
synchronizing cradle and cable that came with your
Pocket PC.
2
Insert the LP-E Card Installation CD into the host PC.
WARNING: The host PC must already be actively connected
to your Pocket PC and have an established partnership.
3
Click Start/Run on the host PC, then type
D:\SETUP
(use
the drive letter of your CD-ROM drive in the place of
D:
).
Follow the instructions on your host PC.
NOTE: If your Pocket PC prompts you to confirm file
replacing, tap
Yes to All
to continue.
4
When the message “Application Downloading
Complete” appears, click OK.
5
Reset your Pocket PC to load the new software.
6
When the Setup Complete screen appears, click OK.
7
Remove your Pocket PC from its cradle.
