Pocket PC Setup
LP-E Card Applet
19
To control auto-launching, tap the Auto-Launch tab.
By default, ActiveSync will run automatically when you
insert the LP-E Card. You can specify a different program to
run at card insertion by selecting the program from the
menu in the Choose a program to run… box. If the
program needs arguments, you can enter them into the
Program arguments: box. If you do not want to auto-
launch any program, select <do not run a program> from
the menu in the Choose a program to run… box.
The number in the delay before launch box controls how
many seconds the Targus Ethernet driver will wait after card
insertion before attempting to make a network connection
or launch a program. Usually you can leave this number at
its default value but, if you are having difficulty attaching to
your network, you can try increasing the delay. You should
rarely have to insert a delay longer than 10 seconds to
make a network connection.
You can also open the control panel by tapping Start,
Settings, and the Connections tab.
