Pocket PC Setup
Software Installation
16
NOTE: If you use a specific (also called “static”) IP address
instead of DHCP, you may need to enter the IP address of the
host computer in the Primary WINS field (
step 6
) to use
ActiveSync.
6
Tap the Name Servers tab and enter DNS and WINS
addresses (if needed), then tap OK.
7
Remove the LP-E Card from your Pocket PC. (For
instructions, refer to
Removing the LP-E Card
, on page
37.)
8
Reinsert the LP-E Card into your Pocket PC and plug
the LP-E cable into the network.
CAUTION: The new IP settings will not take effect until you
reinsert the card. Resetting or power cycling your Pocket PC
will not make it accept the new IP settings.
The ActiveSync screen appears.
9
Choose Network Connection and the name of the
host computer, then tap the Connect… button.
