Windows CE Setup
Changing IP Addresses
33
If you have trouble making the LP-E Card synchronize with
the host, try removing the card and reinserting it or try
resetting your mobile computer. If you have to change any
IP addresses associated with the LP-E Card, use the
Network program from the Settings option of the Start
menu. This procedure is described in the next section.
Remember that you must remove and reinsert the LP-E
Card before any IP address changes will take effect. If you
have problems installing the card, refer to
Troubleshooting
,
on page 39.
Changing IP Addresses
Targus’ LP-E Card Applet allows you to view IP settings but
not to modify them. To modify any IP addresses used to set
up the LP-E, you must run the Windows CE Network applet.
NOTE: Remember that, after you modify IP address settings,
you must remove and reinsert the LP-E Card before any IP
address changes will take effect.
On a Palm-size PC, you can run the Windows CE Network
applet by tapping Start/Settings/Network.
