TANDBERG M2/TT1220CIF/D Instruction Manual Download Page 4

Page: 4 / 114

Preliminary Pages

Page iv

Instruction Manual: Professional Receivers and Decoders (IRD)

ST.TM.TT1220.1

About this Manual

This manual provides instructions and information for the installation and

operation of the TT1220 range of decoders.
This manual should be kept in a safe place for reference for the life of the

equipment. It is not intended that this manual will be amended by the

issue of individual pages. Any revision will be by a complete reissue.

Further copies of this manual can be ordered from the address shown on

page vi. If passing the equipment to a third party, also pass the relevant

documentation.
Issues of this manual are listed below:

Issue

Date

Software Version

Comments

Dec 2000

1.0.0

Initial release.

Feb 2000

2.2.0

Phase 2 software updated release

Acknowledgements

General

All best endeavours have been made to acknowledge registered

trademarks and trademarks used throughout this manual. Any notified

omissions will be rectified in the next issue of this manual. Some

trademarks may be registered in some countries but not in others.
Registered trademarks and trademarks used are acknowledged below and

marked with their respective symbols. However, they are not marked

within the text of this manual.

Registered Trademarks

VideoGuard

is a registered trademark of NDS Limited.

Dolby Digital

and AC-3

are registered trademarks of Dolby Laboratories

Licensing Corporation.
Alteia plus

is a registered trademark of TANDBERG Television Limited.

Trademarks

Alteia

is a trademark of TANDBERG Television Limited.

NDS Director

is a trademark of NDS Limited.

Notice

This product incorporates copyright protection technology that is protected

by U.S. patents and other intellectual property rights. Use of this copyright

protection technology must be authorised by Macrovision, and is intended

limited by pay-per-view uses only unless otherwise authorised by

Macrovision. Reverse engineering or disassembly is prohibited.

Summary of Contents for M2/TT1220CIF/D



















































































































Search results

Summary of Contents for M2/TT1220CIF/D

Reviews:

Related manuals for M2/TT1220CIF/D

Brands by name

Popular brands

TANDBERG M2/TT1220CIF/D, Instruction Manual

Search results

Summary of Contents for M2/TT1220CIF/D

Reviews:

Related manuals for M2/TT1220CIF/D

Brands by name

Popular brands