Introduction
Instruction Manual: Professional Receivers and Decoders (IRD)
Page 1-9
ST.TM.TT1220.1
Cancel an Edit
In the edit mode, if you have incorrectly entered a value, cancel and exit
by pressing multiple times to the left, to move the cursor outside the edit
area. When the cursor leaves the edit area, the previous setting will
reappear, and the keypad will revert to the navigation mode.
NOTE…
Keypad access may be locked, easily recognised by the small lock in the top left corner of the display.
To navigate the menus, escape the locked mode by pressing left, right, 3 x left and then 3 x right in
sequence. This will take you from the default status screen, to the main menu.
1.4.3
Front Panel LED
The unit is fitted with one LED, showing the status of the unit. When the
LED lights up red, an alarm condition has been met, according to the
alarm set-up described in Annex D, Alarm Categories and Conditions.
1.4.4
Conditional Access
5
NDS Videoguard Director Version
There is one slot on the rear of the unit, to allow the insertion of a
Conditional Access (CA) card for the NDS Director VideoGuard system.
NDS Videoguard BSkyB Version
There is one slot on the rear of the unit, to allow the insertion of a
Conditional Access (CA) card for the NDS VideoGuard BSkyB system.
DVB CI Version
There is one slot on the rear of the unit, to allow the insertion of a DVB
common interface (CI) conditional access module. The DVB CI unit will
host the Conditional Access (CA) card for the CA system that matches the
DVB CI module.
1.4.5
Rear Panel
All input and output connectors are located on the rear panel. Connector
descriptions are given in Chapter 2, Installing the Equipment.
5
Note: All CA systems are mutually exclusive.
