Menus
Instruction Manual: Professional Receivers and Decoders (IRD)
Page C-7
ST.TM.TT1220.1
C.3.9
Output Setup Menu
The output setup menu, contains the parameters necessary to configure
the output of the unit. These parameters affect how the video, audio, and
VBI information is decoded, and also controls the timing between the
various components. The menu functions as a hub, containing submenus
for the various groups of editable items.
Table C.10: Output Setup Menu
Display title: ADV: OUTPUT
SETUP
Description
Section
Vid. Setup 625>
Enters the 625 line video setup submenu
C.3.10
Vid. Setup 525>
Enters the 525 line video setup submenu
C.3.11
TV audio setup>
Enters the TV audio setup submenu
C.3.12
Audio2 setup>
Enters the 2
nd
audio setup submenu
C.3.13
PTS setup>
Enters the PTS (timing) setup submenu
C.3.14
Factory adj.>
Enters the factory adjustment setup submenu (password protected)
C.3.15
C.3.10
Vid. Setup 625 Menu
The Video setup 625 menu contains all the parameters that affect the
Video, other than the basic selection of Video service and language, when
displaying 625 line video (PAL, SECAM). These parameters mainly affect
Teletext / subtitling and VBI information.
Table C.11: Video Setup 625 Menu
Display title: OUT: VID. SETUP 625
Description
Section
Teletext
“On” or “Off” selectable. Enables or disables the output of
Teletext, if present in the stream.
Subtitling
“EBU” or “Off” selectable. Enables or disables decoding of EBU
Teletext Subtitling.
VPS
Video programme system. Enables or disables decoding of the
VPS information into the VBI area. “On” or “Off” selectable.
WSS
Wide screen signalling. Enables or disables decoding of the WSS
information into the VBI area. “Off”, “On (DVB)” or “MPEG-video”
selectable. When set to On, WSS will be signalled as sent in the
WSS PID. When set to MPEG-video, WSS will be signalled as
sent in the Video Packet header of the video stream.
Sin(x)/x
Enables Sin(x)/x testlines. “Off”, line “335” or line “319” selectable.
Testlines
Enables testlines. “Off”, “17, 18” or “19,20” selectable. The
numbers indicate on which VBI lines the testlines are displayed.
Frame format
Off: No format conversion is done on the video output.
4/3: Generates a 4/3 picture in the method described in the
Frame conv. Menu item below.
Frame Conv.
14/9: Generates a 4/3 image using the 14/9 combination method.
( Letterbox)
16/9LB: Generates a 4/3 image using the 16:9 letterbox method.
4/3PS: Generates a 4/3 image using the 4:3 Pan & Scan method.
(DVB specified).
