Alarm Categories and Conditions
Page D-6
Instruction Manual: Professional Receivers and Decoders (IRD)
ST.TM.TT1220.1
Table D.6: Data Output Alarm Categories and Conditions
Alarm Category
Contents
Alarm
Description
Remedy
Default
Error in
stream
Cannot decode the
component stream.
Make sure the
correct component
is selected
A
CC failure
TS has missing packets on
the incoming transport
stream.
Improve input
signals, or check
source
W
Buffer
overflow
Output port rate is lower than
incoming data rate.
Increase output rate
or select new
component
A
Not used
No PID selected to decode.
Select PID or turn of
data output
A
Data output:
Same PID
The selected PID is in use by
another part of the decoder.
Choose a different
PID.
W
D.4
CA and PSI/SI Related Errors
D.4.1
CA Related Alarms
The CA status alarms indicate the current condition of the CA system
Table D.7: CA Related Alarm Categories and Conditions
Alarm Category
Contents
Alarm
Description
Remedy
Default
No access
The DVB common interface
module has no access to the
currently selected
component.
Check conditional
access entitlements
with service
provider.
W
No smart
card
There is no smart card
present in the card reader.
Insert the card.
W
CA system:
Bad SC
The smart card present is
not valid.
Insert a valid smart
card.
W
D.4.2
PSI/SI Related Alarms
Contains information about the currently processed PSI/SI arriving at the
decoder.
