General Use
41
3.5.3 Call
Settings
The Call Settings specifies the quality of the call. Each call will be set up with the default Call
Settings if the settings are not altered. Normally it is not necessary for the user to alter the
settings.
The Call Settings are defined in Control Panel - Call Quality – Default
Call Settings
.
When setting up a call in the Make a Call menu:
1. Select
the
Call Settings
field for the participant and press the OK button on the remote
control.
2. Make desired changes to Network, Bandwidth and Restrict (56k). If this is to be the new
default call settings, select Set as Default in the menu.
3. Select the OK icon and press the OK button on the remote control.
It is possible to make the changes made to the
Call Settings
default by selecting Set as Default
and OK. These settings will now be the default settings for all future manually dialed calls.
These settings are also available in the menu Control Panel - Call Quality -
Call Settings
.
Summary of Contents for 8000 MXP
