TANDBERG 8000 MXP User Manual Download

Page: 124 / 328

General Use

111

There is something wrong with the Leased E1/T1 line (Yellow alarm). Please check your
network connection. (193)

H323 gatekeeper warnings

Could not register to the gatekeeper.

The gatekeeper rejected to register the system. Another system is already registered with
the same alias or H.323 ID.

The max capacity on the gatekeeper is reached. Registration failed.

Tried to register to the gatekeeper without a valid alias. Registration failed.

The system is not allowed to register with this gatekeeper.

Can not find the gatekeeper. Check the gatekeeper configurations on the system.

Summary of Contents for 8000 MXP









































































































































































































































































































































Search results

Summary of Contents for 8000 MXP

Reviews:

Related manuals for 8000 MXP

Brands by name

Popular brands

TANDBERG 8000 MXP, User Manual

Search results

Summary of Contents for 8000 MXP

Reviews:

Related manuals for 8000 MXP

Brands by name

Popular brands