TANDBERG 8000 MXP User Manual Download

Page: 144 / 328

General Use

131

5.1.10

Date and Time Settings

NTP IP

This is the NTP time server address from which the system can get updated time information.
See

IP Services

for more details.

Auto

The NTP IP will be provided by the DHCP server

Manual

The NTP IP address is set manually.

IP Address

The IP Address for obtaining the date and time information.

Time Zone

Select the correct time zone for the location of your system.

Date Format

Choose between DD/MM/YY, MM/DD/YY, or YY/MM/DD as the desired date format.

Time Format

Select 12h or 24h time format.

Daylight Savings

Moves the time 1 hour ahead.

Off

Moves the time 1 hour back.

Summary of Contents for 8000 MXP









































































































































































































































































































































Search results

Summary of Contents for 8000 MXP

Reviews:

Related manuals for 8000 MXP

Brands by name

Popular brands

TANDBERG 8000 MXP, User Manual

Search results

Summary of Contents for 8000 MXP

Reviews:

Related manuals for 8000 MXP

Brands by name

Popular brands