TANDBERG 8000 MXP
142
5.2.8
Kiosk Mode Settings
Kiosk Mode
In Kiosk Mode the system is set to a simplified state where it can be controlled with just the four
arrow keys and OK. You will get a simplified on-screen menu with only basic functionality
available:
make calls (using predefined contacts in the phone book)
receive
calls
end calls
adjust
volume
NOTE! Deactivating the Kiosk Mode is only possible through:
•
The web interface, telnet or data port, or
•
By pressing the Phone Book symbol 5 times and the number 3 key on the remote
control. Requires that "Allow Use of Remote Control" set to On.
Using Kiosk Mode
Outside a call the Welcome Menu will be displayed:
Place a Call, Volume and Close.
Summary of Contents for 8000 MXP
