background image

TANDBERG 8000 MXP 

54 

 

3.9.1 Call 

Log 

 

 
The Call Log lists Placed Calls, Missed Calls and Received Calls. That allows the user to see 
which calls that are made in the past. The lists contain a maximum of 30 numbers and the 
numbers are stored in these lists until the system is restarted. If the contacts listed are available 
in the phone book, the names will be displayed instead of the numbers. 
 
Placed Calls lists all outgoing calls, Missed Calls lists the calls that are not accepted and 
Received Calls lists all incoming calls. The calls in the lists are marked with these icons: 
 

outgoing calls 

 

incoming calls 

 

missed calls 

 

The following buttons are available from these folders: 
 

ƒ

 Call 

Now 

ƒ

 

Copy to My Contacts

 

ƒ

 Delete 

ƒ

 Delete 

All 

ƒ

 Cancel 

 

How to make a call using the call lists: 

 

1.  Select a number from the list. 
2.  Press the green Call button on the remote control, or press the left arrow key to select the 

Call Now icon, followed by OK. The call will be set up as a video call or a telephone call 
depending on the selected contact. Alternatively, press the OK button when the contact is 
selected. The Make a Call menu will then be displayed with the name of the contact in 
the Dial Number field, and the Call Settings field will reflect the call settings for this 
contact. It is possible to alter the call settings before placing the call. The call will be set 
up as a video call or a telephone call as described in Make a Call. 

3.  Wait for the call to connect. 

 

How to delete numbers in the call lists do one of the following: 

 

ƒ

 

Choose the Delete button to delete a selected contact from the call list. 

ƒ

 

Choose the Delete All button to delete all contacts listed in the call list. 

 
Note that you will not delete contacts from the Phone Book if you delete them from the call lists. 

Summary of Contents for 8000 MXP









































































































































































































































































































































Reviews: