manualshive.com logo in svg

TANDBERG 8000 MXP, User Manual

Share
Download
TANDBERG 8000 MXP User Manual Download Page 30

Introduction 

17 

 

2.4 System Configuration 

 

 
The system must be configured for each installation. Configuration settings can be made via the 
system menu. If an external IMUX or non-standard network is being used it may be necessary to 
configure any associated external equipment. 
 
Navigate through the menu system using the arrow keys and OK. Remember to press the Save 
button on the bottom of each menu to save the changes. Press Cancel (x) to return to the 
previous Menu. See 

General Use

 for more information about how to use the menus and the 

remote control. 

 

General configuration: 

 

1.

   

Open the

 

General Settings menu

  

Press OK/Menu to open the Menu, if not already displayed. Select Control Panel - 
General to open the General Settings menu.   

 

 

 

2.   Language 

Press OK in the Language field and select the desired language from the list. 

 

3.

   

System Name / International Name*

 

Enter a name in the System Name field using the number keys on the remote control, 
in the same way as with a mobile or cellular phone. Hold down the # key for one 
second to switch back and forth from numbers to alpha characters. 

 

4.   Auto Answer, Phone Book Settings, External Services Settings and 
Permissions 

 

These settings may be left unchanged if no special needs are required. See chapter 

General Settings

 for more information. 

Summary of Contents for 8000 MXP









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands