Tally T2265 SprintPro, Maintenance Manual

Page: 67 / 178

Error message Cause Removing the error
Check if new options are built in
previously.
Wrong Board Wrong logic board Remove logic board or Assy.
Replace it with correct one.
Wrong Head Wrong Head
mounted Remove head. Replace it with correct
head.
Motor hot Motor overload Let printer cool down.
THS Error
T2170, T2280 Printhead defective
or Logic defective Please check
1. printhead cable
2. cable contacts
3. replug head into adapter
Use the:
Show function to analyse the head
temperature
Print function in service menue to
check the coils
Do not forget to adjust the printhead after
substituting head and/or main logic. Also
adjust printhead only in cold state!
If you’re manipulating the printhead (i.e.
plug / unplug the head to solve a contact
problem) run the adjustment procedure to
asure proper function of the sytem. Each
adjustment the new coil values are stored
on the main board.
Check Ribbon Ribbon drive:
carriage moves too
tight The printer checks after 3850 printed
lines if the ribbon drive blocks. In case of
error the printer will switch to hardware
alarm and shows “Check Ribbon” in the
display
Substitute ribbon
Check tightness of CR system
Testmodes and Troubleshooting Troubleshooting
4-5