Tally T2265 SprintPro, Maintenance Manual

Page: 122 / 178

6.3
Soft Adjustments
6.3.1
Setting of Head
Temperature
(Reference value)
(T2170/T2280 only)
Necessary tools:
Thermometer
Caution:
Make sure the printhead has room temperature.
– Make sure the printhead has room temperature
– Keep Top Cover Closed
– Press keys ONLINE and SETUP simulaneously while Power On until
TESTMODE is displayed shortly
– Press key “Temp. cal.“
– Set the actual head temperature (= room temperature) in a range between 15°C
and 30°C using the keys “<” and “>“
– Confirm your setting by pressing SET key. The new value is marked with a star
(*). (Leaving the item with key EXIT the value will not be stored)
– Leave TESTMODE by pressing ONLINE key
Recommendation:
You may use normal thermometer with a tolerance of 2 degrees max. Under normal
working conditions you do not need to adjust a yet installed printhead.
Attention:
Do not install/adjust a “hot” printhead.
Remark:
0 °C equals 32
°
F
t
C
=0.55*(
°
F-32)
°
C t
F
=(1.8*
°
C+32)
°
F
Example:
21 °C
≈
0.55
∗
(70 °F - 23)
70 °F
≈
(1.8
∗
20°C + 32)
Print Temp.cal
Back Next
Online
Setup
2 1 3 4
Temp.cal=23 *
Set < > Exit
Online
Setup
2 1 3 4
Soft Adjustments Adjustments
6-12