Tally T2265 SprintPro, Maintenance Manual

Page: 78 / 178

6. Task Control Codes
Task Control Code Meaning / Description
1 Horizontal Task – active
2 Horizontal Task – Motor is accelerating
4 Horizontal Task – Motor Break on
8 Vertical Movement – active
16 Color Motor – active
32 Motor Function Select – active
64 Motor Sheetfeeder – active
128 Adjustment Printhead Clearance – active
128 B Adjustment AGA
– shift the horizontal drive belt
one notch to the right and
fasten belt again according
adjustments 6.1.1
– active
256 Paper Feed Sheetfeeder – active
512 Bell (sound) – active
1024 Shiftmagnet Printhead – active
2048 Papermovement – active
4096 Tear / View from ESC Seq. – active
8192 Paper Load – active
16384 Paper Eject – active
32768 Tear or View (general) – active
The Task Control Codes may occur as combinations.
Example: code 1026
Meaning: Shiftmagnet inside the printhead active while the horizontal motor is
accelerated.
6.1 Hardware Alarm Task Code 1, 2, 3, 4 – horizontal task
Reason Solution
Printer stops intermittent in DRAFT mode Install newest firmware (T2155/2170)
Non Shielded interface cable according
IEEE 1284 Use a 2m max. shielded interface cable
IEEE 1284
Damaged or dirty icremental stripe Clean*) or change stripe
*) with a mild detergent
Head Adapter Cable Mount new >=047575 D adapter cable
Defective logic Install new main controller
Defective light barrier horizontal clock – Clean intensive the contacts of the flat
cable from the light barrier
– Change light barrier
Noisy horizontal motor Change CR motor
Display Message “Hardware Alarm” Testmodes and Troubleshooting
4-16