Tally T2265 SprintPro, Maintenance Manual

Page: 17 / 178

Multi part forms (to be tested individually!)
Number of copies
Standard printer
2T model 1 + 6
1 + 1
Weight of original 50 to 60 g/m
2
Weight of copies 45 to 56 g/m
2
Weight of bottom sheet 50 to 60 g/m
2
Thickness (max.) 0.024 inches 0.6 mm
Width 3 to 16.5 inches 76 to 420 mm
Form length 3 to 12 inches 76 to 305 mm
Set of forms Sets of forms may be used only if the top edge is
bound. The binding edge should be as soft as
possible. A wavy binding edge may hamper the
smooth feeding of these sets. Multi-part forms have
to be inserted with the glued top facing down.
Multi-part forms should be tested for suitability.
Paper quality Light pulp paper of medium fine quality, paper
bearing the quality mark SM Post and photocopy
paper are suitable for use. Unsuitable are:
satin-finish or coated papers, imitation art papers,
and embossed papers.
Since paper as natural material reacts strongly to
environmental influences (e.g. humidity,
temperature), the place of storage should be
selected carefully. We recommend that this kind of
paper should be tested extensively before larger
quantities are acquired.
Should papers with a dark reverse side be used,
these should also be tested for their functionality.
Please pay attention to the use of infrared reflecting
colors, when acquiring these papers.
Specifications Paper Specifications
2-7