Tally Dascom 7006 User Manual Download

Page: 91 / 130

9-1

Chapter

Printer Specifications

Specifications are provided for reference and are based on printer tests using Tally Das-

com brand ribbons and labels. Results may vary in actual application settings or when

using products other than recommended supplies. We recommend always qualifying any

application with thorough testing. For updated technical specifications please visit us

online at:

http://jadmin.dascom.com

Technical Specification Information

Standard Features

Compact printer design, small footprint high performance

Administrator Configuration Software

Bi-directional USB Drivers

LCD control panel: Back-lit, 2 line, 16 characters (7008 only)

200 MIPS, 180MHz, 32 bit RISC Processor

16 MB SDRAM memory

8 MB flash memory for firmware and stored objects.

Hinged media cover to accommodate oversized rolls

Double clamshell design for easy access user setup menus, easy ribbon loading and sim-

ple media loading.

Rugged die-cast metal user interface.

Audible indicator for error warning or document alert.

Wide path indexing sensor range.

203 dpi print resolution (8 dots/mm)

2” and 4” Print width models

Summary of Contents for 7006



































































































































Search results

Summary of Contents for 7006

Reviews:

Related manuals for 7006

Brands by name

Popular brands

Tally Dascom 7006, User Manual

Search results

Summary of Contents for 7006

Reviews:

Related manuals for 7006

Brands by name

Popular brands