T r o u b l e s h o o t i n g
8-4
Send this file to the printer by selecting
File
then selecting
. The printer will not
print anything but the ready light will blink on and off. Once a solid Green ready light is
visible, cycle the power to the printer. To verify the settings have taken effect, perform a
self test and verify the settings are now set in the printer. For more instructions on per-
forming a self test, please refer to Chapter 2 “Performing the Self Test” of this User’s
Guide.
Serial Communication
If a serial port will be used for printing to the printer, a custom null-modem serial cable
from the manufacturer is required. Refer to the accessories section listed in Chapter 10
“Consumables” or the Printer Product Guide for ordering information.
The default serial communications settings are: 9600, N, 8, 1.
Parallel Communication
If a parallel port will be used for printing to the printer, a custom uni-directional cable
from the manufacturer is required. Refer to the accessories section listed in Chapter 10
“Consumables” or the Printer Product Guide for ordering information.
When printing in parallel the port must be set up as an LPT port, not an ECP port. If the
port is configured as ECP, printing may be inconsistent.
