G e t t i n g S t a r t e d
2-31
15.
Once the ribbon take up core has been installed, turn the take up spindle clockwise
to wind the ribbon leader onto the take up core. Rotate the green take up spindle
clockwise until the black ribbon begins winding on the take up core as shown in
Figure 2-35.
Figure 2-35: Winding the Ribbon Onto the Take Up Core
16.
Gently lower the user interface but DO NOT LATCH the printer. Refer to
Figure 2-36.
Figure 2-36: Lowering the User Interface without Latching the Mechanism
Set User Interface Down:
DO NOT LATCH
