Tally Dascom 7006 User Manual Download

Page: 68 / 130

U S B A H o s t

5-2

Loading firmware using the USB A Host

Create a folder on the flash drive at the root level named TallyDascom.

Inside this folder create a folder named Firmware.

Copy the firmware file (obtained, for example, from the manufacturers web site) in

the Firmware folder.

After the printer has fully booted and is displaying a ready state, insert the USB

flash drive in the printer’s USB A connector.

The printer reads the file in the

TallyDascom

\Firmware folder, and determines if it

contains a firmware upgrade.

If a firmware upgrade is needed, the printer reads the contents of the firmware file,

then re-programs the printer flash memory, and finally reboots. At this time, the

new firmware is loaded and executed in the printer.

NOTES

: The printer will only read the contents of the usb flash drive if it is

inserted after the printer is ready.

Do not modify the firmware file name as distributed by the manufacturer. The

printer uses the filename to know whether the firmware image contained in the

file represents an upgrade. Changing the filename will result in unexpected

results.

To get consistent results, there should be only one file in the

TallyDas-

com

\Firmware folder.

If the file will not load from the usb flash drive, it may be incompatible or it may

contain firmware that is earlier than what is currently running. Please verify

that the firmware file contained in the folder is proper for the printer. If it still

will not load, use the administrator configuring tool to load the firmware.

Summary of Contents for 7006



































































































































Search results

Summary of Contents for 7006

Reviews:

Related manuals for 7006

Brands by name

Popular brands

Tally Dascom 7006, User Manual

Search results

Summary of Contents for 7006

Reviews:

Related manuals for 7006

Brands by name

Popular brands