Tally Dascom 7006 User Manual Download

Page: 9 / 130

1-1

Chapter

Welcome

Congratulations on the purchase of this thermal label printer. With its 2-year warranty,

mid-range performance, and customer service, the printer will provide you continuous

label printing with very little downtime and at the highest quality. Tally Dascom is com-

mitted to providing a high-performance and reliable user experience. This User’s Manual

provides information on how to install the printer and includes all necessary user support

information.
The following list of the documentation is located on the Installation CD, which ships

with every printer.

World Wide Web

— Visit

http://jadmin.dascom.com

to download the latest firmware,

the current printer drivers, or to download or view documentation support.

Quick Start Guide

— The Quick Start Guide provides illustrated high-level printer

setup information including media loading, ribbon loading for thermal transfer models,

and software/drivers installation instructions. A printed copy of this document is pro-

vided with every printer. Chapter 2, “Getting Started”, of this User’s Guide provides fur-

ther instructions on setting up your printer.

Programmer’s Guide

— The Programmer’s Guide provides information about how to

program all printer models. For up-to-date firmware release notes and to download the

most recent firmware required for the printers visit:

http://jadmin.dascom.com

Ethernet Printer Information

— The Ethernet Printer Information provides informa-

tion for configuring and troubleshooting the internal Ethernet print server. The Ethernet

Printer Information is a section of the Programmer’s Guide.

Printer Drivers

(Microsoft Windows® only) — Printer drivers required for the printer

are provided on the Installation CD which ships with the printer. The latest drivers can

also be found on Tally Dascom's web site

http://jadmin.dascom.com

. Full instructions on

how to load these drivers are located in Chapter 3, “Software Installation”, of this User’s

Guide.

Marketing and Sales Support

– The Tally Dascom web site has additional information

and sales support such as product brochures, presentations, and product images. The

files are available in many formats for easy-to-use downloads.

Summary of Contents for 7006



































































































































Search results

Summary of Contents for 7006

Reviews:

Related manuals for 7006

Brands by name

Popular brands

Tally Dascom 7006, User Manual

Search results

Summary of Contents for 7006

Reviews:

Related manuals for 7006

Brands by name

Popular brands