TALEX Sp. z o.o.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. +48 59 821 13 40
e-mail.
User manual
OptiCUT disc mower
Page
25
of
59
Fig. 14 Adjusting the relieving spring
In order to start the mower, efficient safety guards need to be installed. Also follow the
suggestions of section 6: Servicing and maintenance. Always start the mower by
releasing the drive clutches slowly, paying attention to the operating machine. All
observed irregularities prohibit operating the mower. In such case it is important to
read the User Manual again, following all steps regarding the positioning and the adjusting of the
mower. If that does not help, contact the manufacturer and explain all ambiguities
.
Remember about the range of the mower’s operation, which is reached after adjusting the height of the
suspension of the mower in accordance with the Fig. 15.
Fig. 13 The range of the mower’s operation (the range of the bar - 8˚; the range of the beam -
0÷12˚)
Depending on the conditions of mowing, the machine may generate
a noise exceeding 85db. In such case, it is recommended to use
hearing protection.
