TALEX Sp. z o.o.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. +48 59 821 13 40
e-mail.
User manual
OptiCUT disc mower
Page
18
of
59
5. Use of device
The manufacturer ensures, that the machine is fully operational and is inspected in accordance
with the quality control procedures and is approved for use. It does not release the user from
the responsibility of inspecting the machine upon receiving it.
Check the technical condition of the mower prior to every operation, especially the
cutting system, the drive system, the hydraulic installation and the guards.
5.1. Coupling – mower assembly
Make sure that the coupling components of the vehicle and the machine are appropriately
paired to ensure the safe installation and work. In case of any ambiguities, contact the
manufacturer of the vehicle or the machine.
I
. The assembly of the vehicle and the machine’s suspension system.
The machine should be suspended on the three point suspension system of the tractor. To
make the aggregating easier, the hoses of the tractor should be at the height of about
350mm.
