TALEX Sp. z o.o.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. +48 59 821 13 40
e-mail.
User manual
OptiCUT disc mower
Page
9
of
59
Working with the damaged or incomplete articulated telescopic shaft is prohibited. It is
especially prohibited to work without the guards of the moving parts;
The articulated shaft has signs indicating which end should be attached to the tractor;
check whether the direction of the rotations is appropriate prior to turning it on;
Never leave the tractor with the working engine. Prior to leaving the driver’s cabin,
lower the machine to the ground, turn the engine off, take the key out of the ignition,
and set the manual brake;
Do not use unbuttoned, hanging working clothing while at work, assembling,
dismantling or adjusting. Keep it far from the components, which might pull it;
It is recommended to clean and wash the mower after finishing work at a car wash
equipped with waste water treatment or the settling vessel for neutralizing wastewater;
The machine should be stored in places secured from other people and animals,
avoiding the risk of accidental injury, on a flat, hardened surface, under a roof;
In case of failure, immediately turn off the drive carried from the vehicle;
Use hearing protection while operating the machine for the purpose of minimizing the
exposure to noise. It is also recommended to close the door and the windows of the
vehicle’s cabin;
Failure to follow the above rules may pose a risk to the operator and the bystanders, as
well as it may lead to damaging the mower.
