TALEX Sp. z o.o.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. +48 59 821 13 40
e-mail.
User manual
OptiCUT disc mower
Page
31
of
59
Table no. 3 THE TIGHTENING MOMENTS FOR BOLTS AND NUTS
Resistance
6.8
8.8
10.9
12.9
Metric thread
Tightening
Torque [Nm]
M5
4,5
5,9
8,7
10
M6
7,6
10
15
18
M8
18
25
36
43
M10
37
49
72
84
M12
64
85
125
145
M14
100
135
200
235
M16
160
210
310
365
M18
220
300
430
500
M20
310
425
610
710
M22
425
580
820
960
M24
535
730
1050
1220
All safety signs placed on the machine and the triangle plate of the slow moving vehicles
should be kept clean.
At least once a year check the level of oil in the bevel gear. The gear oil should be used with
the SAE90EP characteristics.
It is also important to inspect the tension of the V-belts, and to replace the damaged ones
(always replace whole sets). Everything should be adjusted in accordance with the
instruction in 6.1 Adjusting the blade tension.
It is important to inspect the axis and shaft backlash. In case of observing an obvious
backlash, the axis or shaft bearings must be replaced (always in pairs) with new ones in
accordance with the spare parts catalog. All bearings have rings protecting from the dirt.
6.4 Lubrication
All maintenance and servicing work should be performed with tractor’s engine
disengaged, pressure and rotations cessation, with the vehicle and the machine.
Avoid contact with oil! Use personal means of protection in the form of:
protective clothing, shoes and gloves.
In order to ensure the proper operation of the machine, it must be greased thoroughly and in
a proper manner, in accordance with the manufacturer’s suggestions.
