TALEX Sp. z o.o.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. +48 59 821 13 40
e-mail.
User manual
OptiCUT disc mower
Page
21
of
59
connectors. Before connecting, make sure that the system is not under pressure. Check the
type of oil used in the tractor and the machine’s system – they must be the same.
Disassembly of machine should be performed in the reversed order, maintaining special
conditions of safety while disassembling mechanical system, which separates the machine
from the vehicle. Block the supporting frame in the resting position prior to disconnecting
the mower from the tractor’s suspension system.
After use machine should be store
on support on level concrete surface
5.2. Transport
Lift the mower to the height of 400 mm by the three point suspension system for the purpose
of transport drive. It is recommended to disconnect PTO shaft from the vehicle and placing it
on a hanger.
Fig. 8 Transport position
1
. In the transport position A it is necessary to unlock the latch (1) Fig. 9 during the
lifting up and closing of the valve (2) on hydraulic cylinder.
2
. Maneuvering and moving along public roads
Keep a low speed due to the stability of the suspended machine.
3
. Driving on public roads, it is absolutely necessary that machine must be
equipped with a triangular plate for low-speed vehicles, and light and start the machine -
warning.
