TAKASAGO HX-S-G2 Series, Instruction Manual

Page: 34 / 240

Basic Usage
34
Function Settings Items List
General Functions
Item
No.
Settings Item Range and contents of Parameter Default Value
0
Gen
eral F
un
cti
on
s
Firmware Version Ex: 1.00 (Cannot be changed)
1 Startup Mode Selection
0=CV Priority (High Speed) 2=CV Priority (Low Speed)
* This function can be set for full-
featured type
"model name with F" only
1=CV Priority (Medium Speed)
2=CV Priority (Low Speed)
3=CV Slew Rate
4=CC Priority (High Speed)
5=CC Priority (Medium Speed)
6=CC Priority (Low Speed)
7=CC Slew Rate
2 CV Slew Rate Rising
30V Type ： 0.01V/S-60.00V/S
60V Type ： 0.1V/S-120.0V/S
120V Type:0.1V/S-240.0V/S
400V Type:0.1V/S-800.0V/S
500V Type
： 1V/S-1000V/S
1000V Type ： 1V/S-2000V/S
Maximum of parameter range
* This function can be set for full-
featured type
"model name with F" only
3 CV Slew Rate Falling
4 CC Slew Rate Rising
HX-S-030-200 ： 0.1A/S-400.0A/S
HX-S-030-400
：
0.1A/S-800.0A/S
HX-S-060-100 ： 0.1A/S-200.0A/S
HX-S-060-200 ： 0.1A/S-400.0A/S
HX-S-0120-50: 0.01A/S-100.0A/S
HX-S-0120-100
：
0.01A/S-200.0A/S
HX-S-0400-15 ： 0.01A/S-30.00A/S
HX-S-0400-30 ： 0.01A/S-60.00A/S
HX-S-0500-12
：
0.01A/S-24.00A/S
HX-S-0500-24 ： 0.01A/S-48.00A/S
HX-S-01000-6
：
0.01A/S-12.00A/S
HX-S-01000-12 ： 0.01A/S-24.00A/S
Maximum of parameter range
When Parallel Connection:
(Maximum Output Current x 2)/s
* This function can be set for full-
featured type
"model name with F" only
5 CC Slew Rate Falling
6 Serial I/F2
0=Serial Data Communication
Control (Remote Mode) 0=Serial Data Communication
Control (Remote Mode)
* This function can be set for
full-featured type
"model name with F" only
1=Use for Sequential ON/OFF
(Local Mode)
7 ON Delay Time 0.00s~99.99s
0.00s
* This function can be set for full-
featured type
"model name with F" only
8 OFF Delay Time 0.00s~99.99s
9 Operation during Alarm
0= Stop switching 0= Stop switching
1=Input Switch TRIP
(Only for TRIP input and serious
failures)
2=Input Switch TRIP
(TRIP input, serious failures, OVP,
and OCP)
10
Output ON/OFF Toggle with
External Contact
0=Invalid 0=Invalid
1=When close Output is ON, When
open Output is OFF
2=When close can be ON/OFF by
panel control, When open Output
is OFF
11
Measurement Value Moving
Average Processing
0=No 0=No
1=Yes
12
Linearity Compensation Function
Operation Mode
0=Compensation Mode OFF 1=Operates when Output is
turned ON/OFF or when settings
are changed.
Saves compensation value after
converging
1=Operates when Output is turned
ON/OFF or when settings are
changed.
Saves compensation value after
converging
2=Performs continuous
compensation