TAKASAGO HX-S-G2 Series, Instruction Manual

Page: 33 / 240

Basic Usage
33
Function Settings
This section covers setting parameters for various functions. Parameters that can be set are the device address,
bitrate, parity, Output ON/OFF Toggle at external contact, selection of external analog control, OUTPUT settings
when POWER is ON, voltmeter and ammeter display when OUTPUT is OFF, etc.
For details, see the FUNCTION Settings Items List. (page 34).
Setting Functions
Setting Procedures
Press The Function “FUNC.” key.
The FUNC. lamp will light.
The Setting Item Number will be displayed in the Number Display
(voltage) and the parameter will be displayed in the Number
Display (current).
Select the Item Number with the VOLTAGE dial.
Change the Parameter with the CURRENT dial.
Press the FUNC. key again to finalize settings.
The Number Display (voltage) and the Number Display (current)
will return to the measurement display mode.
It is possible to continue to change other setting items without
pressing the FUNC. key.
In this case, press the FUNC. key to confirm settings once
changes are finished.