TAKASAGO HX-S-G2 Series, Instruction Manual

Page: 5 / 240

Safety Instructions
5
For your safety
This product is a power supply system for business use, which uses an input power of AC180V~242V (three phase).
Please be forewarned that it is not produced as an electronic device for general home use.
Improper use of this product may result in injury, electric shock or death, and may also result in fire.
Please thoroughly read and understand this manual prior to use. Further, this product should only be handled by a
specialist knowledgeable in electricity safety, or under the supervision of such a person.
Please read through this manual to ensure the proper placement and use environment for this product before turning
on power.
If any problems arise, please unplug the power supply plug from the outlet power immediately and contact Takasago.
Two or more persons are required to carry the this equipment. Turn off the input power switch "POWER"
and remove all cables from the main body beforehand. Hold the bottom surface during carrying.
Do not hold the handles on both sides. The handles are for rack mounting and not for carrying.
Exporting
Please contact Takasago in advance if wishing to export or carry this product outside of Japan.
Using this product near receivers (radios, televisions, etc.) may interfere with reception.
Please do not use this product in any medical, nuclear, or work involving human life.
Caution
1. Reproduction of the material contained within this manual without notice is strictly
prohibited.
2. Information contained within this manual may be altered without notification.
3. All material contained within this manual has been thoroughly examined. If by chance, any
errors, suspicious items, or omissions are discovered, please contact Takasago.
4. Takasago Co., Ltd. shall undertake no responsibility, regardless of clause 2, for any impact
this product may have on results.
Caution