TAKASAGO HX-S-G2 Series, Instruction Manual

Page: 115 / 240

Using via Digital Data Communication
115
SEQuence
：
PATTern
：
Set contents of sequential operation
Function ：
Set operation contents of sequenctial operation
Same as FUNCTION Setting Item 110 - 159.
Format: ：
SEQuence
：
PATTern[]
＜
NR1
＞，＜
NRf
＞，＜
NRf
＞，＜
NR1
＞，＜
NRf
＞，＜
NR1
＞
① ② ③ ④ ⑤ ⑥
SEQuence
：
PATTern?[]
＜
NR1
＞
①
Type ：
SET command, QUERY command
Parameter ： ＜ SET command ＞
①
Sequential operation line 1 - 10
② Constant Voltage Setting Value note) Setting range is depended on the DC power supply.
③
Constant Current Setting Value note) Setting range is depended on the DC power supply.
④
Control Time (min.) 0-9999
⑤ Control Time (sec.) 0.0-59.9
⑥
Control contents 0: OUT OFF, 1: STEP, 2: SWEEP
＜ QUERY command ＞
①
Sequential operation line 1 - 10
Response ： ①
Constant Voltage Setting Value
②
Constant Current Setting Value
③
Control Time (min.)
④ Control Time (sec.)
⑤
Control contents
Restrictions ： Alarm response is returned for normal SET commands in the following conditions
- Alarm is occurring
- Sequential operation is in progress
- Power supply is operating as slave machine in serial operation
- Power supply is operating as slave machine in parallel operation
＜ Ex. ＞
SEQ
：
PATT[]1,30.0,100.0,1,30.0,2
SEQ
：
PATT?[]1
30.0,100.0,1,30.0,2