TAKASAGO HX-S-G2 Series, Instruction Manual

Page: 93 / 240

Using via Digital Data Communication
93
[SOURce]:CURRent:SLEW:RISing
: Sets the CC Slew Rate Rising
Function: Sets the CC slew rate for rising.
Same as FUNCTION Settings Item 4
Format: [SOURce]:CURRent:SLEW:RISing <NRf>
Type: SET command, QUERY command
Parameters: Range varies depending on the total output capacity of the parallel connection.
Response: Same as parameters
Model(Type)
Total Output
Capacity
Output Current Ranges (A/S)
30V Output Type 60V Output Type
500V Output
Type
1000V Output
Type
6kW 0.0 to 400.0 0.0 to 200.0 0.01 to 24.00 0.060 to 6.600
12kW 0.0 to 800.0 0.0 to 400.0 0.01 to 48.00 0.12 to 13.20
18kW 0 to 1200 0.0 to 600.0 0.01 to 72.00 0.18 to 19.80
24kW 0 to 1600 0.0 to 800.0 0.01 to 96.00 0.24 to 26.40
30kW 0 to 2000 0 to 1000 0.1 to 120.0 0.30 to 33.00
36kW 0 to 2400 0 to 1200 0.1 to 144.0 0.36 to 39.60
42kW 0 to 2800 0 to 1400 0.1 to 168.0 0.42 to 46.20
48kW 0 to 3200 0 to 1600 0.1 to 192.0 0.48 to 52.80
54kW 0 to 3600 0 to 1800 0.1 to 216.0 0.54 to 59.40
60kW 0 to 4000 0 to 2000 0.1 to 240.0 0.60 to 66.00
66kW 0 to 4400 0 to 2200 0.1 to 264.0 0.66 to 72.60
72kW 0 to 4800 0 to 2400 0.1 to 288.0 0.72 to 79.20
78kW 0 to 5200 0 to 2600 0.1 to 312.0 0.78 to 85.80
84kW 0 to 5600 0 to 2800 0.1 to 336.0 0.84 to 92.40
90kW 0 to 6000 0 to 3000 0.1 to 360.0 0.90 to 99.00
96kW 0 to 6400 0 to 3200 0.1 to 384.0 1.0 to 105.6
102kW 0 to 6800 0 to 3400 0.1 to 408.0 1.0 to 112.2
108kW 0 to 7200 0 to 3600 0.1 to 432.0 1.1 to 118.8
114kW 0 to 7600 0 to 3800 0.1 to 456.0 1.1 to 125.4
120kW 0 to 8000 0 to 4000 0.1 to 480.0 1.2 to 132.0
Restrictions: Alarm response is returned for normal SET commands in the following conditions
·
Cases other than full-featured type "model name with F"
· While operating as a series operation slave unit
·
While operating as a parallel operation slave unit
<Ex.>
CURR:SLEW:RIS 400.0
CURR:SLEW:RIS?
400.0