TAKASAGO HX-S-G2 Series, Instruction Manual

Page: 111 / 240

Using via Digital Data Communication
111
SYSTem:TRIP
: Executes TRIP
Function: Executes TRIP operation (output stop) by setting operation for stopping output
Format: SYSTem:TRIP
Type: SET command only
Parameters: None
<Ex.>
SYST:TRIP
SYSTem:TRIP:MODE
: Sets operation for stopping output during TRIP execution or serious/light failure
Function: Sets operation for stopping output during TRIP execution or serious/light failure
Same settings as FUNCTION Settings Item 9
Format: SYSTem:TRIP:MODE <NRf>
Type: SET command, QUERY command
Parameters: 0: Stop switching
1: Execute input power relay trip (at TRIP detection or serious failure)
2: Execute input power relay trip (at TRIP detection or serious failure, or when OVP/OCP triggered).
Restrictions: Alarm response is returned for normal SET commands in the following conditions
- While operating as a parallel operation slave unit
<Ex.>
SYST:TRIP:MODE 1
SYST:TRIP:MODE?
1
SYSTem:BUZzer:BUTtom
: Sets ON/OFF of button sound at front panel operation
Function: Sets ON/OFF of button sound at front panel operation
Same as FUNCTION Settings Item 90
Format: SYSTem:BUZzer:BUTtom <NRf>
Type: SET command, QUERY command
Parameters: 0: OFF
1: ON
Response: Same as parameters
Restrictions: None
<Ex.>
SYST:BUZ:BUT 1
SYST:BUZ:BUT?
1
 Serious failure is defined as a case when an alarm can be canceled via command or by panel
reset (holding down the RESET key).
(Restart device with power switch)

Serious failure Error
For details on WDT, OHP, AD-OV, P_ERR, BST ALM, Device Detection Failure, and Device
No. Disagreement error code, see page 46.
！
CAUTION