27
Installation of Chair
6
○
Refer to the overall layout diagram (pages 2, 3) and paper template (pages 5, 6) and install the chair.
*Refer to the supplied installation manual of each chair for checking the details of chair installation.
(1) Slide the basin unit to the shampooing position and lock it.
*When locking it, slight click is felt.
(2) Unlock the chair rotation and rotate the chair to the shampooing position.
(3)Align the center of chair and basin unit, and lock the chair rotation.
(4) Recline the chair to its maximum position.
(5) Raise the chair and adjust the height between the edge of backrest
(neck attached position) and neckrest fittings of the basin unit.
(6) Set the preset position of the chair.
When sliding the basin unit, hold the edge of basin.
Basin unit is locked at the initial position and shampooing position. Slight click will be felt when it is locked.
●
While sliding the basin unit, hold the basin with hands at
around the area of initial position and shampooing position,
and lock the unit gently. If the basin unit is attached to lock
points swiftly, it may result in product breakage or injury.
[Unit: mm]
【
Height difference between backrest edge and neckrest fittings
】
Note
Refer to the operating manual supplied with each chair to
check the chair operation.
Caution
＜
YUME Basin
＞
Chair maximum height
15
Backrest edge
(Neck attached position)
Height difference between backrest edge and neckrest fittings
(*1)
（
*
）
Height of neckrest fittings: 774
(*) Height of neckrest fittings slightly differ from product to
product.
*The above value shows the height of neckrest fittings
comparing to the edge of backrest (headrest).
【
For example
】
In case of -10,
Neckrest fittings are 10 mm lower than the edge of
backrest (headrest).
Height difference between backrest
edge and neckrest fittings
（
*1
）
Product name
LUAR
0
LEGEND
0
INOVA
- 10
DIVAN
10
LUXURY MAXIM
- 10
REGALO II
- 10
SET JOY Able
0
penta
15
15
macaron
6-1 Installation of Chair
6-2 Setting of the chair preset position
■
Sliding the basin unit
Summary of Contents for YUME SWING
Page 35: ...35 MEMO...
