(2) Mark the center part of screw attachment position of caster rail.
(3) Remove the caster rail.
(4) Drill the holes at the marked positions.
Wooden floor
Tapping (5 x 30)
Unit: mm
【
Screws to be used
】
Use the actual caster rail and mark the points. Be sure to
mark at the center of each screw hole.
２
Drill holes on the caster rail attachment position.
(1) Insert the caster rail under the rotation arm and set to the paper template position.
*Hairline surface to be placed upward.
Hairline surface of caster rail to be placed upward.
■
Wooden floor
Drill holes on marked
positions. (8 locations)
Rotation arm
Support with
the inserted block.
Caster rail
Caution
Caution
Caster rail
attachment points
Upper surface : Hairline finish
(Surface containing the line in the same direction)
Under surface
(Surface without line)
20
Summary of Contents for YUME SWING
Page 35: ...35 MEMO...