29
Pay attention to make chair aligns with the mirror center.
(7) Refer to the right illustration and adjust the chair position.
Basin Unit
Height of neck fittings
（
*1
）
EX-YMSBXYM2 [YUME Basin]
774
Chair maximum height
15
Backrest edge (neck attached position)
Height of neckrest fittings (*1)
Caution
(5) Centering the loosened bolt, rotate the basin unit
to the desirable direction for adjustment.
(6) Secure the bolts on the screw holes which locate
at the desired direction for the adjustment and fix
the basin unit on the rotation arm.
Note
There is 1 each screw hole at the clockwise and anti-
clockwise direction for adjusting the basin unit. The
holes are covered by seal. Remove the seal and use the
holes as necessary.
When installing the basin unit to rotation arm, align the
back side of the base and rotation arm.
・
Failure to follow this instruction may cause rotation
arm cover and basin unit to contact, or product will
not be installed correctly.
●
View from the shower head side
●
View from the side
*Make these
lines align
Base
Rotation arm
Base
Back side of the rotation arm
Neck cushion side
Shower head side
Plate
(Basin unit
attachment part)
Rotate the basin
Rotate the
basin
* Remove the seal and
fix it to either hole.
Anti-clockwise
Anti-clockwise
Clockwise
Clockwise
Shower head side
Neck cushion side
Caution
Summary of Contents for YUME SWING
Page 35: ...35 MEMO...
