Takara Belmont YUME SWING, Installation Manual

Page: 24 / 36

24
(3) Fasten the hexagon screws of the shower head side.
Note
Since there is no space to insert the electric screwdriver,
use a spanner for fastening the hexagon screw on the
right side of shower head.
(2)Align the basin unit with the attachment holes
(2 locations) on the neck cushion side, and fix
*Fasten the hexagon screws completely.
Note
Do not use the attachment covered by seal.
The holes with seal will be used at “Adjustment of Center
Position of Basin Unit and Chair” (Refer to page 29.)
When installing the basin unit on rotation arm, pay
attention to make the back side of the base and rotation
arm (shown in gray color in the below illustration.) to face
the same side.
・ Failure to follow this instruction may cause the rotation
arm cover and basin unit to contact or will not be
installed properly.
Caution
*Fasten only this bolt
with spanner.
● View from the shower head side
Basin unit
Hexagon screw
(M8 x 50)
Electric
screwdriver
*Tighten only this
bolt by spanner.
Neck cushion side
Shower head side
● View from shower head side
Base
Rotation arm
●側面から見る
※同一面にする
Base
Back side of the rotation
arm
Neck cushion side Shower head side
*Make these parts to align.
● View from the side