28
6-3 Checking after installing the chair
○
After moving the basin unit to the shampooing position (Refer to pages 2, 3), move the chair to preset position,
and check the followings. *Refer to the operating manual supplied with each chair for checking the chair operation.
6-4 Attaching seal
○
Stick 2 pcs. of seals on the chair at the fixed
shampooing position for easy setting from next time.
*6 pcs. of seal is supplied but 4 pcs. are spare.
■
Inspection items
1) If the space between backrest edge of the chair and the basin is around 15 mm.
2) Center of the chair aligns with the center of basin unit.
If it does not align, perform the process “7 Adjustment of the Center of Basin Unit and Chair” (page 28).
■
Position of the seal to be attached
・
Chair base and lower cover
・
Visible position when rotating and locking the chair.
Lower cover
Chair base
Seal
Stick the seal
on the position
that chair is rotated and locked.
＜
Adjusting the position of basin
＞
(1) Check the difference between the center of chair and
basin unit.
(2) Loosen the basin unit attachment screws (4 pcs.).
(3) Slide the basin unit to the desired direction and align
the center of chair and basin unit.
○
After the completion of chair installation, if the center of chair and the basin unit need adjustment, perform
the following processes.
■
If the center will not align even when doing the
above (2), (3) processes.
(4) Loosen the bolt at the right side of the basin unit on
the shower head side and remove other 3 bolts.
Do not remove
this bolt.
●
View from shower head side
Remove the
3 bolts.
Neck cushion side
Shower head side
Loosen this bolt.
(Do not remove.)
Adjustment of Center of Basin Unit and Chair
7
Summary of Contents for YUME SWING
Page 35: ...35 MEMO...
