32
Installation of Maintenance Cover
11
When installing the cover, pay attention not to hit or pinch
other parts. Failure to follow this instruction may cause
scratches or product malfunction.
Note
*Before attaching the cover, check there is no scratches or
dirt on the cover. If any problem is found, contact the
nearest dealer or Takara Belmont directly.
Note
(1) Install the maintenance cover to the main unit cover.
(2) Secure the maintenance cover with an Urea screw
(M5 x 15 with gasket).
Installation of Caster Cover
12
(1) Attach the caster cover on the rotation arm caster
(2 locations).
(2) Secure each caster cover with an Urea screw (M6 x 21,
with gasket).
●
Gasket is supplied with the screw, so check the part is
not missing and fix it properly.
●
Without the washers, it may be difficult to remove the
screws when water leakage into the unit occurs.
●
When attaching the Urea screw, do not use any tools,
but attach it by hand.
●
In the case of using tools, resin part may get broken.
Caution
Caution
Caution
・
Gasket is attached to screw, so check that the part is
not missing during transportation. And fix it properly.
・
Without the washers, it may be difficult to remove the
screws when water leakage into the unit occurs.
・
When securing the screw, do not use any tools, but
attach it by hand.
・
In the case of using tools, resin part may get broken.
Neck cushion side
Urea screw
M6 x 21
with gasket
Caster cover
Caster
Base front
cover
Shower head side
Urea screw M6 x 21
with gasket
Caster cover
Caster
Maintenance
cover
●
View from neck cushion side
●
View from shower head side
Screw M5 x 15
with gasket
Shower head side
Maintenance cover
Main unit cover
*The Urea screws are held down the main body with
the maintenance cover. (see page 11 and 15)
Summary of Contents for YUME SWING
Page 35: ...35 MEMO...
