TAJIMA TCMX 601, User Manual

Page: 4 / 130

Contents
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
6.
CONVENIENT FUNCTIONS
Please use these functions actively.
1.
CONFIRMATION OF DESIGN (CONFIRMATION MODE) .... P.6-2
......... This function makes a list of details of design data.
2.
MANUAL ORIGIN RETURN................................. P.6-3
......... This function makes the embroidery frame move to the origin
(start position of design) in the middle of embroidery.
3.
TOTAL STITCH COUNTER/DESIGN TIME ......... P.6-3
......... This function checks the number of total stitches and/or time spent
for embroidery.
4.
POWER RESUME................................................ P.6-4
......... When the power is shut down, this function prevents displacement
of design.
5.
CHECKING OF SOFTWARE VERSION .............. P.6-4
......... This function checks software version.
6.
PRESET HALT ..................................................... P.6-5
......... When counting reaches a set value, the machine will stop automat-
ically.
7.
NEEDLE BAR COLOR ......................................... P.6-6
......... This function performs color scheme to each looper and displays
an image of finished sewing.
8.
AUTOMATIC START AFTER AUTOMATIC DATA SET ... P.6-7
......... This function makes the machine to perform embroidery repeat-
edly at the same position.
9.
SLEEP MODE ...................................................... P.6-7
......... This function switches the machine to power save mode.
7.
DESIGN DATA, MEMORY PROCESSING
Edit, sore and/or delete design data.
1.
DATA CONVERSION........................................... P.7-2
..... Enlargement, reduction, rotation of design
2.
CLEANUP............................................................. P.7-3
......... This function removes fine stitches.
3.
DATA EDIT (MODIFY/DELETE)........................... P.7-4
......... This function modifies and/or deletes a stitch.
4.
DATA EDIT (INSERT) .......................................... P.7-6
......... This function inserts a stitch.
5.
FLOPPY DISK PROCESSING (SAVE) ................ P.7-9
......... This function stores design data to a floppy disk.
6.
FLOPPY DISK PROCESSING (DELETE).......... P.7-11
......... This function deletes design data in a floppy disk.
7.
MEMORY CARD PROCESSING (SAVE) .......... P.7-12
......... This function stores design data to a memory card.
8.
MEMORY CARD PROCESSING (DELETE)...... P.7-13
......... This function deletes design data in a memory card.
9.
DELETING MEMORY DESIGN.......................... P.7-14
......... This function deletes design data in the memory.
10.
INITIALIZATION OF MEMORY .......................... P.7-15
......... This function deletes all memory designs and returns each setting
value and password to the initial value.
8.
TO OPERATE THE MACHINE MANU-
ALLY
Activate the machine manually.
1.
MANUAL NEEDLE HEIGHT SELECTION........... P.8-2
.........This operation changes needle height.
2.
MANUAL STITCH TYPE SELECTION................. P.8-2
.........This operation switches stitch type (loop stitch/chain stitch).
3.
D-AXIS ORIGIN RETURN.................................... P.8-3
.........This function makes the driving shaft (D-axis) that rotates sewn
needle and nipple return to the origin. At the same time, the looper
will also return to the origin.
4.
LOOPER FIXED POSITION RETURN................. P.8-4
.........This operation returns looper to the fixed position.
9.
PARAMETER (RPM, FRAME DRIVE)
Set working conditions of the machine.
1.
FRAME TRAVEL SPEED .................................... P.9-2
.........Set origin return and travel speed of the embroidery frame at off-
setting.
2.
MAX REVOLUTION ............................................. P.9-2
.........Set the maximum RPM of the main shaft of the machine in CM
head and FM head respectively.
3.
FRAME TYPE ...................................................... P.9-3
.........This function sets the frame to use.
4.
FRAME DRIVE START TIMING .......................... P.9-3
.........Set drive start timing of the embroidery frame.
5.
LIMIT OF MAX REVOLUTION............................. P.9-4
.........Set the upper limit of value of “Max revolution”.
10.
PARAMETER (EMBROIDERY, HEAD)
Set working conditions of the machine.
1.
WEAK BRAKE.................................................... P.10-2
.....This setting applies brake to the main shaft motor at stop of the
machine.
2.
THREAD BREAKAGE DETECTION.................. P.10-2
.....Set sensibility of thread breakage detection.
3.
THREAD MANAGEMENT AFTER THREAD TRIMMING.... P.10-3
.....This setting selects whether cut end of thread after thread trim-
ming is pulled out onto the fabric or not to prevent fray of thread.
4.
THE NUMBER OF TIE STITCHES .................... P.10-3
.........Set the number of tie stitches (chain stitches) to prevent fray of
thread.
5.
FRAME BACK FUNCTION ................................ P.10-4
.........This setting selects whether to perform frame back or not.
JZ07