TAJIMA TCMX 601, User Manual

Page: 85 / 130

8-4
To operate the machine manually
4.
Looper fixed position return
Return looper to the fixed position.
1.
To call the screen......................................................
2.
To execute ......................................................... End
Selecting will cause the warning buzzer to sound.
Pressing [SET] will cause the looper to return to the
fixed position.
Switching the screen
Main screen ....................
Other setting • operation.
Looper fixed position
In the state where the threading hole (2) of the looper (1)is
positioned at the front side. At this moment, it is possible
to perform threading from the threading hole (4) of the
needle plate (3).
In case of stop by bar switch (also including start/stop
switch) or by thread breakage, the looper will return to the
fixed position automatically.
1
2
3
4
[Viewing from top]
Fixed position
3
4
1
F5
List screen List screen
5 Looper Fixed Position Return (CM)
or
Press ?
F5
Example: to execute
E
A D2 F1 F6
JZ07