TAJIMA TCMX 601, User Manual

Page: 81 / 130

7-16
Design data, memory processing
1.
To call the screen......................................................
1.
Turn OFF the power.
2.
Insert the floppy disk (DISK 1/6) to the FDD.
3.
Turn ON the power. The screen for installation as shown right
will appear (It takes a while).
2.
Initialization of memory.............................................
1.
Select initialization of memory.
2.
Take out the floppy disk.
3.
Turn OFF and ON the power. ............................................End
1
IP setting
For details, consult the distributor.
Installation of software
• Each setting value will return to the initial value
(p.11-11).
• The password will return to “0000”.
Initialization of memory (p.7-15)
• Each setting value will return to the initial value
(p.11-11).
• The password will return to “0000”.
• All memory designs will be erased.
1
2
3
2 3
Install
An example when using a floppy disk. It
is also possible to use a memory card.
Initialization of memory
Memory
INT
Finish !!
Memory INT
DISK 1/6
When turning OFF/ON the power, wait for five seconds
or more.
JZ07