TAJIMA TCMX 601, User Manual

Page: 104 / 130

Software installation and necessary
11-11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
7.
Setting for each setting item (parameter)
Since each setting value including option (parameter) returns after installation of software, perform setting again according
to need.
The initial value (abbreviated as IV) may differ from the actual value depending on the machine spec. or developing conditions.
Please note beforehand.
key Parameter IV key Parameter IV
Automatic color change (AC)
NO
Frame travel speed 200
Automatic start (AS) Thread Detection (CM) 2
Automatic start at the same color Manual needle height selection 9
Automatic start after automatic data set The number of tie stitches 2
Max Revolution (CM)
800
Thread handling after thread trimming
Down
Frame back/forward
F.B
Setting for frame back function
NO
Frame back/forward (feed unit)
1
Taping (CM)
NO
Frame Back All Head Sew
0
Password
0000
Halt Frame Back NO Limit of max revolution 800
Preset halt (stitch) 0 Frame drive start timing 280
Preset halt (data) 0 Weak brake YES
Preset halt (design) 0 Network NO
Preset halt (lubrication) 10
Preset halt (1 stitch before end) NO
Low Speed R.P.M. 600
Revolution limit (the first needle) 1000
Revolution limit (the last needle) 1000
Revolution limit (low speed code) 500
The number of inching times at start 0
Automatic origin return YES
B
F2
F5
C
SET
F1
SET
F2
SET
F3
F2
JZ07