TAJIMA TCMX 601, User Manual

Page: 83 / 130

8-2
To operate the machine manually
1.
Manual needle height selection
Change needle height manually.
1.
To call the screen......................................................
2.
To execute ......................................................... End
Needle, nipple and presser foot will move.
Switching the screen
Main screen ....................
Other setting • operation.
2.
Manual stitch type selection
Switch stitch type (loop stitch/chain stitch) manually.
1.
To call the screen......................................................
2.
To execute ......................................................... End
Switching the screen
Main screen ....................
Other setting • operation.
CAUTION
When performing this operation, do not put your hands
etc. near needle or on the machine table. Since needle
bar moves up and down, you could be injured.
To perform embroidery with the selected needle height
(excluding H), set “NO” to “Auto Color Change (AC)”
(p.4-8).
Needle height
0
9 times, H (retracting
Low High
position
!
F5
List screen List screen
2 Manual Needle Height
or
Press ?
F5
The needle height that is currently selected will be dis-
played.
0 (2 mm) to 9 (4.7 mm) *In increments of 0.3 mm,
H (retracting position)
0
Example :5
0 5
E
A D2 F1 F6
To perform embroidery with the selected stitch type, set
“NO” to “Auto Color Change (AC)” (p.4-8).
F5
List screen List screen
2 Manual Stitch Type Selection (CM)
or
Press
F5
L (Loop stitch), C (Chain stitch)
L
Example: chain stitch
L C
E
A D2 F1 F6
JZ07