TAJIMA TCMX 601, User Manual

Page: 93 / 130

10-4
Parameter (embroidery, head)
5.
Frame back function
This setting selects whether to perform frame back or not.
1.
To call the screen......................................................
2.
To set ................................................................. End
Switching the screen
Main screen ....................
Other setting • operation.
Frame back movement
After ATH activates to trim sewing thread, the machine
will perform frame back.
To perform embroidery from the position where frame back
started without detection of thread breakage, set the turn-
over switch of the head to “Top” once after performing
frame back.
F5
List screen List screen
9 Frame Back Function (CM)
or
Press ?
F5
All
Setting range
All: Embroidery will start after frame back.
NO: Not to perform frame back
Example:
All NO
E
A D2 F1 F6
JZ07