manualshive.com logo in svg

Tadiran Telecom Coral IPx 800 Series, Installation Procedure And Hardware Reference Manual, Page: 364 / 400

Share
Download
Tadiran Telecom Coral IPx 800 Series Installation Procedure And Hardware Reference Manual Download Page 364

7-50

 

Coral IPx 800 Installation Manual

PS

19 

AC Power Su

pply U

n

it

7

PS19 AC Fuse

The PS19 AC includes one fuse, F5, to protect the AC mains input. If the fuse blows, 
the PS19 AC Power green indicator and Alarm red indicator do not illuminate.

Replacing a Fuse within the PS19 AC

1.

Remove the power supply unit from its slot and place it over the anti-static 
material with the component side facing upwards, as described on 

page 7-47, 

Removing the Power Supply

.

2.

Replace only with the same type and rating of fuse (10A/250V S.B.). 

 

See the PS19 AC card layout shown in 

Figure 7-11

.

3.

Reinstall the power supply unit as described on 

page 7-46, Installing the Power 

Supply

.

Do not insert or remove the PS19 AC unit from the cage when turned ON. Sudden 

power surges could damage system components.

Summary of Contents for Coral IPx 800 Series

















































































































































































































































































































































































































Reviews:

No comments